Gordy,
I'm at the point where I can practice casting for
about 20-30 minutes each day and I
actually have days that are 99% pain free.
My casting is coming along well except in one
area that I find to be a constant struggle.
My timing is slow. It seems to be okay when
carrying shorter lengths of line (under
30 feet) and with a lot of concentration I can
carry up to 45 or 50 feet of line. Beyond that
the line unrolls nicely but by the time I've
started my cast in the reverse direction the line
has developed a sag. Somewhere around 55-60 feet
the line often ticks the ground on my
forward and backcast. As I say, the line is
unrolling nicely, is horizontal to the ground when it
completely straightens, and the end is 8-12 feet
above the ground depending on my rod plane.
At that point my shoulder, while not in pain, just seems to be slow to react and the
line starts its sag.
I can only guess that as I increase my arc/stroke
length I am adding more shoulder movement
to the mix and the more I add the worse the
problem gets because the shoulder is slower than
I'm used to. I've tried to start the reverse cast
a bit early, and this helps up to a point,
but as
I increase line carry I start to creep. I've
also tried to substitute more body motion
(rocking) to
compensate for the shoulder and this also helps
to a certain degree but I still find it very
difficult
to carry more than 55-60 feet of line. When
I double haul I can carry perhaps another 10 feet
of line before the slow shoulder comes in to
play. Putting everything together - hauling,
rocking, and telling myself to start the reverse
cast early I can carry perhaps 60 feet of line
consistently. Prior to the shoulder injury I was
able to carry roughly 70 feet without hauling.
Any advice on how to work on this?
Thanks
Walter