Phillip & ol Al ....
Yes....that's on target.
All the requirments are on the written list of tasks and in the MCI Study Guide. Remember that a mend is manipulation of the fly line after the cast. Mends may be on the water mends, or in the air mends.
MCI candidates should be able to make aerial mends to the right and left and should be able to teach how to:
1.) Make them narrow (side to side) short excursion lateral rod tip movements.
2.) Make them wide (side to side) long excursion lateral rod tip movements
3.) Make them long (end to end) increased time for lateral rod movement
4.) Make them short (end to end) shorter time for lateral rod movement
5.) Make them at different distances around targets, all the way from a target at 15' to a target at 45' for short targets, make the mend later and lower. For distance targets, make the mend earlier and higher. For great distance mends (45' to 60') may elect to carry more line, make the mend very early (right after loop formation), use higher loop speed, and shoot the mend once formed.
Other mends not on the exam but which should eventually be learned:-
Vertical hump mends (used for feeding slack line downstream or for a hump mend pickup when the line is on the water with high grass, etc.)
Right angle mends
Double mends
"S" mends
Compound mends.
Upward and downward vertical reach mends.
MCI candidates should be able to come up with about 12 uses for various mends while fishing.
Candidates should read,"....THE NATURE OF FLY CASTING", Jason Borger. P.2 , PP.83 - 98 and PP 195 - 199.
Also: "THE CAST", Ed Jaworowski (Great photos by Lefty Kreh !) pp.160 - 166
And: "Joan Wullff's FLY CASTING TECHNIQUES" pp. 169-172.
Also: "FLY FISHING STRATEGY", Doug Swisher and Carl Richards, pp 41-44.
" : "ON THE TROUT STREAM....", Joe Humphreys...(The "downer/upper cast-mend") pp. 21-27.
" : "CASTING ANGLES" by Mac Brown (For basic mends, wind mends, the,"heavenly mend", the, "bucket mend", etc)., pp.138 - 141.
" : "PRESENTATION" by Gary Borger, (On mending including curve mends, roll cast mends, anchor mends, the, "dancing line mend", the, "hump mend, the parachute mend, reach mends and others) : pp228 - 232.
For those interested, I'll be teaching these and other specialty moves and casts at my workshop, "Difficult Casts to Difficult Places" at the FFF Conclave at Bozeman, Mo. in July.
Gordy
From: "Rispin, Phil" <PhilipRispin@xxxxxxxx>
To: "Allen Crise" <flysoup@xxxxxxxxxx>,"Rod Henderson" <roderickmpt@xxxxxxxxxxxxx>,"Jerry Puckett" <jerry_puckett2001@xxxxxxxxx>,"Ron Mc Quary" <codyfly@xxxxxxxxxxxxxx>,"Wes Hodgson" <fifasoccer@xxxxxxx>,"Gary Eaton" <geaton@xxxxxxx>,"Travis Burt" <tburt@xxxxxxxxxxxxx>,"Sonny Hinojosa" <csonnyh@xxxxxxxxx>,"Dennis Burns" <Dennis.Burns@xxxxxxxxxxxxxxxxxx>,"Marshall Lasswell" <mlasswell@xxxxxxxxxxxxx>,"jeff jackson" <tjjackson3@xxxxxxxxx>,"Rusty Dunn" <caandu@xxxxxxxxxxxxx>,"John Till" <till@xxxxxxxxxxxxx>,"Dale Connally" <Dale_Connally@xxxxxxxxxx>,"Gordon Hill" <hillshead@xxxxxxx>,"Keith Richard" <KRichard@xxxxxxx>,"Steve Hollensed" <stevehollensed@xxxxxxxxxx>,"Ron Allen Thomas" <koolfly1@xxxxxxxxxxx>,"Matt Wilhem" <educate@xxxxxxxxxxxxxxxxx>,"LC Clower" <lcclower@xxxxxxxxxxx>,"Ken Cole" <ken.cole@xxxxxxxxxxxxx>,<james.parker3@xxxxxxxxxxx>,"James Russell" <jrussell1128@xxxxxxxxx>,"Harry Boyd" <maker@xxxxxxxxxxxx>,"Gary Wood" <brushycreekfc@xxxxxxxxx>,"Don DeRidder" <ddr125@xxxxxxx>,"Dave Speer" <dave@xxxxxxxxx>,"Clay Roberts" <CRoberts@xxxxxxxxxxxxxxxxxxxxxx>,"cindy Alexander" <calex75773@xxxxxxxxx>,"Stacy Trimble" <stacytrimble@xxxxxxxxxxxx>,"Steve Barlow" <steve.barlow1@xxxxxxxxxxx>,"John Deardorff" <jdeardorff@xxxxxxxxxxxxxxxx>,"David Bradley" <dallasflyfisher@xxxxxxxxx>,"Troy Miller" <Troy.Miller@xxxxxxxxxxxxxxx>,"Harvey Harris" <Hlhpc@xxxxxxx>,"Don McCurry" <donmcmurry@xxxxxxxxxxxxx>,"Kevin Hensley" <jargo432@xxxxxxxxx>,"Ronnie Ray" <Ronnie.Ray@xxxxxxxxxxxxxxxx>,"Ryan watters" <rwatters11@xxxxxxxxxxx>,"David Brydon" <david.brydon@xxxxxxx>,"Ray Emerson" <wacovet@xxxxxxxxx>,"Alan Seals" <aseals12@xxxxxxxxx>
Subject: RE: Quiz 4/10
Date: Thu, 13 Apr 2006 13:09:22 -0500
Well Allen, I went to the Web site to see what was said about performing "Mends" and couldn't find anything so what follows is a guess.
A Casting Instructor Candidate should be able to perform, upstream and down stream mends without disturbing the tippet and fly or what we like to call the Terminal Tackle. I would think that Reach Casts could be thought of as an in air mend before the line in on the water and should be preformed either in an upstream or down stream direction.
Let me know if I am on the right track.
Phil Rispin
Longview Texas
________________________________
From: Allen Crise [mailto:flysoup@xxxxxxxxxx]
Sent: Wed 4/12/2006 12:05 PM
To: Rod Henderson; Jerry Puckett; Ron Mc Quary; Wes Hodgson; Gary Eaton; Travis Burt; Sonny Hinojosa; Dennis Burns; Marshall Lasswell; jeff jackson; Rusty Dunn; John Till; Dale Connally; Gordon Hill; Keith Richard; Steve Hollensed; Ron Allen Thomas; Matt Wilhem; LC Clower; Ken Cole; james.parker3@xxxxxxxxxxx; James Russell; Harry Boyd; Gary Wood; Don DeRidder; Dave Speer; Clay Roberts; cindy Alexander; Stacy Trimble; Steve Barlow; John Deardorff; David Bradley; Troy Miller; Harvey Harris; ol Al; Don McCurry; Kevin Hensley; Ronnie Ray; Ryan watters; David Brydon; Ray Emerson; Alan Seals; Rispin, Phil
Subject: RE: Quiz 4/10
Howdy Caster of the long rods
Phil sent a response that led me to believe that I was not clear on the question. So what should you to during your test if not clear? Ask for more information. BUT being a member of this study group you should know just what is required or I messed up....
On the Question of the week :
Get on your list and tell me what are mends required for the CCI test and what are the Cast required of the Candidate?
You are right on the Masters
:
"...Now what would the Masters be looking for in each cast?.."
On the CCI test there is not a hook cast required that is on the masters.
Now see if you can tell what the MENDS & CAST are to look like. That is: Try to describe the cast or how to perform the task.
The idea is that although the cast is listed it is left up to your casting style to use the mechanics to get it done. Watch the Reach cast. That one can get you....This will give you a study in saying and writing the words for the actions.